Masking Tape Tips
Quick jump to Ralston
© 2013 CTT GROUP ALL RIGHTS RESERVED
To send this page to a friend, just complete the form below. You may also include a personalized message. The link to the page that you want to send will be automatically inserted in the email.
Your name *
Recipient's name *
Recipient's e-mail *
Your message *
Obligatory fields are marked with an asterisk.
Click on any circled regions above to learn about proper masking techniques or use the menu below.
It is exciting to see how paint can transform a room! But prior to opening the first paint can, it is critical to properly prepare the surfaces you will paint. Many paint projects end in frustration and disappointment simply due to a lack of adequate surface preparation.
We invite you to visit a very interesting section of Sico’s website which talks about surface preparation. Simply click on the Sico logo below and you will find a “Virtual Advisor” that will show you what you need to do to prepare your surfaces. Just identify which surfaces you will be working with and carefully follow the advice offered.
Click on the link below to accessSICO’s Virtual Advisor website section.
Each masking tape has specific characteristics and adhesion properties suited to specific uses. Using the correct tape will ensure that your project will be a success. And since Masking tape is a small part of your painting costs, it is well worth using the one that will give you the best results:
Masking tape is "pressure-sensitive". To ensure good contact with the surface, it is necessary to apply pressure to the entire stripe of the tape. If the pressure is not sufficient, the tape adhesive will not stick in its entirety and may fall from the surface (and paint may run under it).
Removing tape without removing paint can be a delicate operation and some simple precautions are needed. Here are some tricks to remove the tape properly and without any damage:
It is important to understand that "flat" surfaces may not be as flat as they appear. In fact, most surfaces have imperfections that no masking tape can properly adhere to.
Note: When you apply the tape on a base coat, use matte varnish to seal the holes. When the tape is applied on a paint colour you should use the same colour as the colour under the tape to seal the holes.
This technique works with all types of masking tape, but for optimum results we recommend EdgePro® tape. If you are creating curved forms, we recommend PaintPro® tape (7DayPro® in the US).
Borders, wood trims and door or window frames usually exceed a width of 48mm (2in) width, which makes them difficult to cover with masking tape.
That’s why we created PaintPro® Mask tape! Combining PaintPro® tape (7DayPro® in the US) with waterproof masking paper that unfolds to 6 inches, PaintPro® Mask is simple, practical and easy to use.
Nothing works better than EdgePro® tape to create stripes of colour! This tape is made of very thin and flat paper that considerably reduces accumulation of paint on the border of the tape. Even more important, the paper is rigid so it won’t stretch when applied in long strip. EdgePro® helps create clean and precise fine lines and stripes.
Be creative! Use different EdgePro® tape widths to create your stripes of colours. For instance, use a layer of 72mm tape combined with a 24mm tape stripe to create a larger stripe of colour. Make sure both tape stripes slightly overlap.
Create crisp curves and nice round lines using 6mm and 24mm width of PaintPro® tape (7DayPro® in the US).
Create patterns using the thin and easy-to-form 6mm PaintPro®* tape to create your design. Then widen the protection by applying 24mm PaintPro®* tape on top of the 6mm tape to further mask the surface and protect it from the paint. Here are the steps used to create the tree shown on the image on the left.
This magnificent mural was created by decorative artist Isabelle Leclerc. We invite you to visit her web site (www.atelier-leclerc.com) to examine and appreciate the variety and quality of her creations.
Isabelle created and painted this mural as per our request to showcase her expertise in the creation of "faux finis" using various Cantech masking tapes. This site guides you on the proper use of the masking tape and provides interesting advices and tips for the success of your project.
Isabelle was assisted by Stéphane Page.
Isabelle has chosen Sico Supreme, Eggshell Super Latex Acrylic for all colours. Here is the description of all shades and their location on the mural:
Interior Latex Primer and Undercoater 240-125
Click here to connect to SICO's website.